Outrigger Stabilizer

BIGMAX Outriggers/Stabilizers

We offer a full range of multi-purpose hydraulic outrigger stabilizers.

Outrigger Stabilizer     Outrigger Stabilizer

Click to enlarge diagrams.

BIGMAX OUTRIGGER/STABILIZER TYPES

Type E
Model E
Type Description Available
with:
Crane Size** Typical Uses
E Cross beam with two side extensions and two hydraulic legs. Manual or hydraulic extensions.

Adjustable, manual tilt up or fixed height legs.
2 -120 t/m

14,430 to 865,920 ft/lbs
Main or auxiliary stabilizers for truck mounted cranes and equipment.
Type B
Model B
B Cross beam with one side extension. Manual or hydraulic extension.

Adjustable, manual tilt up or fixed height legs.
4 -31 t/m

29,000 to 224,000 ft/lbs
With side or corner mounted cranes, such as on mechanics service trucks.
Type F
Model F
F Cross beam with two fixed legs. Adjustable, manual tilt up or fixed height legs. 2-31 t/m

14,430 to 224,000 ft/lbs
For centre mounted cranes or other equipment that is stable without lateral extensions.
Type H
Model H
H Half stabilizer; short beam with one side extension and one hydraulic leg. Adjustable, manual tilt up or fixed height legs. 2-4 t/m

14,430 to 29,000 ft/lbs
With small cranes or other equipment that is side mounted.
Type C
Model C
C Leg only (no cross beam) with mounting plate and lock valve. Adjustable, manual tilt up or fixed height legs. 2-120 t/m

14,430 to 865,920 ft/lbs
General purpose use such as for post drivers, trailers, ditchers and for use as a landing leg.
Type T
Model T
T Stabilizer assembly with integrated mounting base for BigMax TC Series cranes. Adjustable, manual tilt up or fixed height legs. 1-4 t/m

7,200 to 29,000 ft/lbs
Enables mounting of small crane directly to truck chassis (in lieu of deck mounting).
Type X
Model X
X Front bumper-mounted stabilizer. Leg only with mounting plate and lock valve. Adjustable, manual tilt up or fixed height legs. 2-120 t/m

14,430 to 865,920 ft/lbs
Boom trucks or cabover trucks.
 

**Note: Stabilizers should be selected by a qualified engineer and/or installer based on crane and chassis specifications. The crane must meet ANSI B30.5 stability requirements.